Type something and hit enter

By On
Advertisement
SP Flash tool is an application you could find very useful in fixing extreme cases of a bricked MTK Android (e.g Tecno, Gionee, Infinix, Opsson, Innjoo etc) like the phone not coming on at all or not booting into recovery mode etc. It is used to flash recovery, Roms, unbrick MTK Devices.

REQUIREMENTS
πŸ›A PC
πŸ›USB Cord
πŸ› Manually install VCOM drivers on the PC ( Visit Procedures Here)
πŸ›The phone you wish to flash the files to (ensure there's an SD card in the phone)

πŸ› Download SP Flash tool (Download Here)

Procedure On How To Use Sp Flash Tools

1. Remove the battery from the phone and slot it back in without booting the phone (If the battery is inbuilt then simply switch if off). Also, ensure there's a formatted SD card in the phone (if there's an SD card slot)
2. Launch SP Flash Tool as Administrator
3. Click on Scatter-loading by the right
4. In the window that pops up, select the scatter file for your phone model then click Open (scatter file is a text file with the word "scatter" in its name )

5. A list with ticked boxes should appear in SP flash tool (preloader, mbr, ebr etc)
6. πŸ”ΈπŸ”ΈπŸ”ΈπŸ”ΈπŸ”ΈπŸ”ΈπŸ”Έ

Step 6 is only for when you wish to format the phone. Skip if you don't wish to format
Warning! Do Not format unless you have the stock ROM for your exact phone model.

6a. Click Format at the top
6b. After clicking Format, a dialogue box will pop up, ensure that 'Auto Format Flash' and 'Format whole flash without Bootloader' are selected
6c. Click OK, Stop should now be red or green in color
6d. Connect the switched off phone (with battery inside) to the PC via USB cord
6e. A progress bar should load till you get a 'Success' message (green circle with OK)
6f. Disconnect the phone from PC

πŸ”ΈπŸ”ΈπŸ”ΈπŸ”ΈπŸ”ΈπŸ”ΈπŸ”ΈπŸ”ΈπŸ”Έ

7. Untick the box in front of any item you do not wish to flash
8. To manually load an item that doesn't automatically get ticked after loading the scatter file, tick the box in front of that item then double-click its Location and select the corresponding file in the window that pops up
9. Once the file(s) you wish to flash is (are) ticked, click Download (with an arrow above it)
10. Stop should now be prominent while other options should be grayed out
11. Connect the switched off phone (with battery inside) to the PC via USB cord
12. A progress bar should start running
13. Wait till you get a Success message (green circle with OK), do not interrupt before then

14. Disconnect the phone, remove the battery for 15 seconds (if removable), slot it back in then power up the phone
15. Ensure to do a factory reset in recovery mode to clear any errors.
You have successfully unbricked your Mtn Device or flashed a TWRP recovery into your Mediatek Device.

Source: https://forum.hovatek.com/

If you experience any problems or errors, ask using the comment box.

Tags: use sp flashtools, unbrick MTK devices, vcom drivers

Your comments will be appreciated and replied on time. Spams will be deleted upon review.
Follow Us Now On Fbk 

Click to comment